Pump NB-32 (NB-50)
The main purpose of the pump NB-32 is forcing of washing fluid, such as water or clay solution to the well when drilling on gas or on oil. Besides the pumps NB-32 are widespread at the enterprises of the chemical and food industry where pumps use as pumping of nonaggressive…
Pump NB-125 / 9 MGY / NB-125 IZh
The pump of boring NB 125, 9 MGY is used for forcing of flushing solution to wells at prospecting, structural and search drilling and also when carrying out other flushing works at capital repairs of oil and gas wells. NB 125, 9 MGY is the two-piston, horizontal, two-cylinder device, bilateral…
Pump NTs-320 / 9T / NPTs-32
The pump NTs 320 two-piston, horizontal, bilateral action, with the built-in worm-and-wheel gearbox is intended for giving of various liquid environments when carrying out cementation of wells and flushing and squeezing works in the course of drilling and repair of wells as a part of pump installations. The pump NTs-320…
ANTs320 / ANTs320U unit
The pump piston cementing NTs-320 — the pump horizontal, two-piston bilateral action with the built-in worm-and-wheel gearbox of the increased load ability. It is intended for forcing of liquid environments (clay, cement, salt mortars) during the flushing and squeezing works and cementation of oil and gas wells in the course…
Pump boring 8T-650
Boring pump 8T-650-01 of piston type
Shutoff and connecting valves
Ball valve 50х70
The crane spherical KSh-50h70 is intended for overlapping of pipelines of high pressure at development and repair of oil wells, an intensification of production and cementation.
pipe 50х70/3КШ.00.000 / 3КШ.00.000 (-01)
For connection of pipes of the manifold in fast-folding pipelines. The manifold line connects pump installations with well head fittings.
Ball valve 25х70 / ОФСП.306121.011
The crane spherical 25х70 is intended for overlapping of pipelines of high pressure at development and repair of oil wells, an intensification of production and cementation.
Squares, tees are intended for connection and a branching of elements of fittings.
Quickly folding connection
Quick disconnect connection is a mechanism which allows to connect quickly two hydraulic knots with each other or to sleeves of high pressure.
Latch of ZMS 65-210(350)HL(K1)
The latch full bore is intended for installation as the locking mechanism on well head as a part of gushing and delivery fittings, transporting water, oil and gas and also on pipelines of high pressure, with a temperature of working environment up to 120 °C
Pipe of High Pressure (PHP)
These products are manufactured in accordance with GOST 633-80. Pressure is from 40MPA up to 70MPA
For connection of the equipment and other knots among themselves. NKT in accordance with GOST 633-80
The key boring automatic stationary AKB-3M2 is intended for mechanization of processes of screwing together and discrediting of boring and casing pipes at hoisting operations. It is applied when drilling oil and gas wells.
Screwing together-razvinchivaniya of pipes and couplings of oil execution at repair of wells are intended for carrying out assembly and dismantling trade works and also.
Are applied to carrying out assembly and dismantling works for screwing together-razvinchivaniya of threaded connections manually or the mechanized way
Belts driving apply in belt drives to transfer of rotary motion on considerable distances and changes of the transfer relation.
Cuffs / Rings / Sealing glands
Shaped products are made by method of hot curing of crude rubber mixes in metal compression molds.
Sleeves and hoses
Sleeves are rubber, are intended for giving under pressure head pressure and also for absorption of various liquids, gases, abrasive materials. All sleeves rubber consist of an inside and external rubber layer and the internal reinforcing framework which can be made of cotton strengthening, a textile framework, a metal wire…
Set of installation of the digital sensor of pressure in the Unit
This set is intended for a conclusion of indications of pressure of the pump in a TsA320 unit cabin. Provides more exact indications on comparisons with the ordinary manometer, allows to control pressure of the pump without leaving a unit cabin. Operating temperature from-40 to 70 Service life before the…
Manometer MP4-U-IP53-60mpa x 1.5
Manometer MP4-U-IP53-60mpa x 1.5 radial without flange, the case with a diameter of 160 mm of specification 25-02.180335-84
+7 (3412) 48-75-00,
+7 (3412) 90-20-82
or order a call and our consultant will solve your issue immediately